CDIT Protected Element Transducers

+1-408-986-0725
sales@cdint.com
DUNS: 948142211
CAGE Code: 4W0Q2

...shipping worldwide since 1995.

December 21, 2024 GMT

Protected Element Transducers

Protected Element Transducers are used for rough, irregular or hot surface. There are three different types of protective faces. Protected Membrane, Protected Wear Cap, and High Temperature Delay Line. These transducers are available in both G series and S series with either straight or right angle BNC connectors. Lemo connectors may also be available.

Element Size	A	B
1.125	1.59"	1.38"
1.00	1.59"	1.25"
0.75	1.59"	1.00"
0.50	1.59"	0.75"

Option	Element Size & Part Numbers
Option	1.125"	1.00"	0.75"	0.5"
Membrane	PM11	PM10	PM7	PM5
Wear Caps	PW11	PW10	PW7	PW5
High Temp Delay	PHD11	PHD10	PHD7	PHD5
Delay Rings	PDR11	PDR10	PDR7	PDR5

Protected Membrane(PM) is designed to improve coupling with the rough-surface test materials.

Protected Wear Cap(PW) prevents the transducers from being damaged by the rough-surface test materials. The cap is replaceable.

High Temperature Delay Line(HDL) is used for hot surface testing. The temperature can be allowed up to 900°F.

Frequency	Element Size		Part Numbers
(MHz)	(Inch)	(mm)	Part Numbers
0.5	1.125	29	PE05-11
	1.00	25	PE05-10
	0.75	19	PE05-07
1.0	1.125	29	PE1-11
	1.00	25	PE1-10
	0.75	19	PE1-07
	0.50	13	PE1-05
2.25	1.00	25	PE2-10
	0.75	19	PE2-07
	0.50	13	PE2-05
3.5	1.00	25	PE3-10
	0.75	19	PE3-07
	0.50	13	PE3-05
5.0	1.00	25	PE5-10
	0.75	19	PE5-07
	0.50	13	PE5-05

Store | Automated UT Systems | Scanners | UT Transducers | Cables and Connectors

Legal | Privacy